Fabric Exhibition Solutions

Product Description

Product Overview

Fabric Exhibition Solutions are made up of two main components: a strong, lightweight, tubular aluminium frame and a printed fabric cover.

Product includes specified sized units with specialised feet and connectors to join walls together. Also includes standard feet so that the wall units can be used individually if required.

The 260gsm stretch fabric cover is printed on the front with a white reverse and is designed to fit snugly over the frame. It is then secured at the bottom with a zip fastening to maintain tension.

Assembly can be performed by one person, but in most cases we recommend at least two people to apply the graphic. Assembly time is approximately 10 minutes.

The graphics are dye-sub printed resulting in a rich and vibrant finish which is excellent for exhibition and indoor displays. Graphics fold up and fit in the bag, making these units light and easily transportable.

The fabric cover is washable and easily changeable. Additional or replacement graphics can be ordered separately. Old graphics can be recycled with other textiles.

• Lightweight and strong aluminium hardware components.
• Includes a bespoke-printed graphic
• Bespoke-printed graphic on Stretch Fabric.
• Includes a carry bag that contains the unit hardware for easy portability and transportation. For some of the smaller sized frames, the graphic can also fit inside the carry bag. Larger graphics will need to be transported separately.

What You Get

• Snap-fit aluminium frame
• Stretch fabric graphic (printed either single-sided)
• Carry bag

Specification

Please note, overall width and depth sizes are increased by approximately 20mm-40mm when using the connector and corner feet. This should not affect the ability to use each combination of walls in their corresponding standard shell schemes.

Assembly Recommendations

1. Snap together the frame pieces, using the indicated number stickers.
2. Slide the graphic over the frame. (To avoid the internal hems creating an uneven finish along the edge of the unit, apply the graphic twisted about 30-50mm towards the left or right. Slowly pull the graphic to the bottom of the frame. You will now have part of the rear graphic on the front, or vice-versa. Once the graphic is pulled as far downwards as possible, grip both left and right sides of the frame and twist the graphic into the correct position.)
3. Fasten the zip under the bottom edge of the frame.
4. Attach the frame feet.

Notice

Fabric Exhibition Solutions are recommended for indoor use only, and are not suitable for outdoor use.

Please note, due to the nature of fabrics that are not completely opaque, when these graphics are subject to strong lighting (especially from above or behind), some visibility of the frame through the graphic is possible. To avoid this, we recommend limiting the amount of light above or behind the unit, as well as adjusting the positioning of the unit.

While we make every effort to finish these graphics as accurately and consistently as possible, due to the nature of printing, cutting and finishing fabrics, some material movement and minor imperfections in alignment can be introduced. For this reason, we highly recommend not wrapping continuous or detailed shapes between front and rear graphics.

Graphics can be washed in a regular washing machine on a 30° wash without detergents. Always allow graphics to completely dry before using or storing.